M310 – Swing clamp cylinder double-acting, compact design, pipe thread connection, head flange
- Compact design
- Pipe thread connection, flange above
- max. operating pressure 250 bar
Function:
This hydraulic swing clamp is a pull cylinder, in which a part of the total stroke is used to turn the piston.
Swivel direction:
Swing clamps are optionally available right or left swiveling and without swiveling. The standard swivel angle is 90°, 60°, 45° and 0° (tolerance +/- 2°). Custom swivel angles can be supplied at any time on request.
Technical Data:
| Piston | mm | 15 |
| Rods | mm | 10 |
| Swivel angle | +- 2° | 0,90,60,45 |
| Operating pressure min. | bar | 30 |
| Max. operating pressure | bar | 250 |
| Tensile force max. | kN | 2.45 |
| Swivel stroke | mm | 11 |
| Clamping stroke | mm | 6 |
| Total stroke | mm | 17 |
| effective piston area (cm²) | Clamp | 0.98 |
| Release | 1.77 | |
| Oil consumption per stroke (cm³) | Clamp | 1.37 |
| Release | 3 | |
| allow. volume flow (cm³/s) | Clamp | 6 |
| Release | 6 |